|
 |
|
The water we use normally contains chemical elements,
such as calcium and magnesium, which determine water
HARDNESS, and over time generate SCALE in the hydraulic
circuits. This issue can be overcome using a softening
system which performs ion exchange, detaining calcium and
magnesium salts, and releases sodium salts into the water.
Softened water ensures a clean hydraulic circuit, preserving
the original functional features of the system.. |
|
 |
The production of industrial softeners by Tecnocom is
the most comprehensive available in the market. The
system flow rate varies from a few litres to high flow
rates. They are available with centralized valves,
typical of medium-small size installations, up to the
most sophisticated systems using pneumatic valves. The
tanks can be in resin suitable for food, reinforced in
fibreglass, or in carbon steel. When processing cannot
stop, not even for resin regeneration, it is possible to
use alternate duplex systems, with two columns which
alternatively perform regeneration, providing a
continuous supply of treated water.  |
CUSTOMIZATIONS AND INTEGRATIONS |
|
The standard products can be customized and integrated
in other systems, even existing ones. Specific
customizations can meet specific customer requirements. |
|
 |
The salts which determine hardness usually are present
in the water and they are soluble. Yet, due to heating
or evaporation, they tend to precipitate forming scale
or other types of deposits. In home appliances, such as
washing machines, dishwashers, boilers, etc., the scale
tends to deposit on the electric resistances which heat
the water; this leads to an increased energy
consumption, which may exceed even 35-40%, and this
leads to a gradual failure of the system. Hard water has
a negative influence as well in cleaning processes: in
fact the molecules of the detergent mix with calcium
ions creating non soluble mixes which increase the
amount of detergent required and deposit of fabric
fibres which matt.
|
 |
|
|
|
